how can i use PROP/TYPE 32 (SPR_PRE)
Hello everyone,
Hello everyone,
I am creating a vehicle seat model on the radios and I want to pre-stress the bolts used here. I have looked at the topics mentioned in the forum and most people recommend PROP / TYPE32 (SPR_PRE). I could not understand how to use it. I would be grateful if anyone could explain it simply with examples.
Thank you very much for your help.
Answers
-
Hi
To use 1D pre-tension, you will need to use 1 (one) PROP/TYPE32 (SPR_PRE) spring for the DOF 1
and need to use a 2nd element in parallel, property type /PROP/TYPE13, to take care of the DOF2-6.
Please refer to the tutorial in Radioss:
Hope this is helpful
Regards
0 -
Rogerio Nakano_21179 said:
Hi
To use 1D pre-tension, you will need to use 1 (one) PROP/TYPE32 (SPR_PRE) spring for the DOF 1
and need to use a 2nd element in parallel, property type /PROP/TYPE13, to take care of the DOF2-6.
Please refer to the tutorial in Radioss:
Hope this is helpful
Regards
I am pleased to do so.
0