Error #1000***

Shiva Far
Shiva Far Altair Community Member
edited October 2020 in Community Q&A

Hi,

 

I am very new to this software. I am using optistruct for thermal optimization study and I get'*** ERROR # 1000 *** in the input data: Incorrect data in field # 2.' I have a very simple geometry. It is a plate from which the design and non-design spaces have been extruded backward and forward, respectively. I would really appreciate any input on this problem. I am attaching the model as well in case needed. 

 

Thanks!

Unable to find an attachment - read this blog

Tagged:

Answers

  • Rahul Rajan_21763
    Rahul Rajan_21763 New Altair Community Member
    edited August 2019

    Please delete the control card you defined. You could use thermal compliance as response instead of weighted compliance for thermal optimization.

  • Shiva Far
    Shiva Far Altair Community Member
    edited September 2019

    Thanks for the reply Rahul. Now I am facing the*** INTERNAL PROGRAMMING ERROR ***
    with below description:

     in file 'calcflux.F', at location # 433.
      
           ioerr(1) =      76801
     ****  ABORTING RUN DUE TO AN INTERNAL ERROR  ****

    Could you please guide me how to solve this issue now?

     

    Best,

    Unable to find an attachment - read this blog

  • Rahul Rajan_21763
    Rahul Rajan_21763 New Altair Community Member
    edited September 2019

    Please try with attached fem deck.I tried with change in material property/Volume as design constraint and Mindim in DTPL. 

    Unable to find an attachment - read this blog

  • Shiva Far
    Shiva Far Altair Community Member
    edited September 2019

    Thanks a bunch Rahul, it works perfectly now!

Categories