The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
Hi everyone,
I am wondering why the Mass in my .out file is diffrent from the Mass in my Hypermesh model. It is in tons, so dont wonder why its that low.
This is from the .out file:
This is the Design Space:
And This is the rest:
Thanks in Advance.
do you have any other masses such as NSM(non structural mass) anywhere?
Total mass from the whole model is accurate comparing .out and HM measure?
Maybe you're not exporting everything for the solver deck?
Hi,
I have two CONM2, but they are included. The total mass varies also from what HM calculates.
In the .out file it gets to much mass, which means that I did not miss to export some parts.
Any further ideas?
without the model i can't tell what can be wrong, unfortunately.
Join us for a community conversation on Pulse Width Modulation (PWM), a fundamental technique in electric motor control, and explore how different PWM strategies can yield significantly different results. This webinar provides a comparative analysis of various PWM methods and their effects on motor efficiency, torque…
Join us for a community conversation to discover the Advanced Iterative Solver(AIS) in Simcenter Feko and its application to electrically large and computationally demanding electromagnetic models. The session will provide a general overview of how iterative solution methods can help improve efficiency of large scale…
Join us for a community conversation on how High-Performance Computing (HPC) and Simcenter PSIM work together to meet the increasing demands of modern power electronics simulation. During this one-hour technical session, you'll discover how leveraging HPC can speed up simulations, improve scalability, and empower engineers…
