export deformed shape without stress tensor and thickness in HyperView

 I want to get a FE model after a simple simulation.  
1.simulation using Radioss.

export deformed shape

but which i possibly need is not exported.

as it said ,when i import the FE model which exported in HyperView, there are all elements without stress tensor.

Community-Pasted-Attachment-1625549800312.png

Community-Pasted-Attachment-1625549809440.png

Community-Pasted-Attachment-1625549834966.png

Find more posts tagged with

English

HyperMesh

HyperView

Radioss

v2020.0

Accepted answers

All comments

Adriano_Koga

Hi,

HV does not export the stress tensor. Only the deformed shape of your mesh.

You can import the .sta (state files) from your initial Radioss run in order to get the stress and thickness initialization cards into your new model.

zifan kuang

Hi,

HV does not export the stress tensor. Only the deformed shape of your mesh.

You can import the .sta (state files) from your initial Radioss run in order to get the stress and thickness initialization cards into your new model.

thank you so much.

maybe you are sleeping, im so sorry for replying at this time.because im in GMT+08:00 ,it is noon now.

i tried it .i know that i could export the stress tensor form the file (as XX.A012)but not the file(as XX.h3d) in HV,

read A012 in HV,export deformed shape,i get 777.rad with /INSHE/STRS_F .but without Thickness

when i read 707.h3d ,it is shown the same as yesterday.

i think you must want me to use the /STATE/SHELL/STRESS/FULL to make the stress of shells in the keyword /INSHE/STRS_F to be active.

as i import the file(777.rad) in Hypermesh ( slover desk select Radioss).

this is i get .

if i use control card /STATE/SHELL/STRESS/FULL ,I can make the stress (as it said in Reference Guide >Initial Conditions >/INISHE/STRS_F or /INISH3/STRS_F, like First plane stress , Second plane stress and so on ) to be active replacing zero, and then i can simulate closing to true condition.

and may i ask , which keyword is need for initial thickness before i run Radioss with the file,because i can export the stress tensor and the plastic strain except Thickness .

Looking forward to your answer ,and thank you so much.

Community-Pasted-Attachment-1625643936786.png

Community-Pasted-Attachment-1625643960442.png

Adriano_Koga

thank you so much.

maybe you are sleeping, im so sorry for replying at this time.because im in GMT+08:00 ,it is noon now.

i tried it .i know that i could export the stress tensor form the file (as XX.A012)but not the file(as XX.h3d) in HV,

read A012 in HV,export deformed shape,i get 777.rad with /INSHE/STRS_F .but without Thickness

when i read 707.h3d ,it is shown the same as yesterday.

2.

i think you must want me to use the /STATE/SHELL/STRESS/FULL to make the stress of shells in the keyword /INSHE/STRS_F to be active.

as i import the file(777.rad) in Hypermesh ( slover desk select Radioss).

this is i get .

if i use control card /STATE/SHELL/STRESS/FULL ,I can make the stress (as it said in Reference Guide >Initial Conditions >/INISHE/STRS_F or /INISH3/STRS_F, like First plane stress , Second plane stress and so on ) to be active replacing zero, and then i can simulate closing to true condition.

and may i ask , which keyword is need for initial thickness before i run Radioss with the file,because i can export the stress tensor and the plastic strain except Thickness .

Looking forward to your answer ,and thank you so much.

sorry, i'm not quite expert in Radioss, so my knowledge is limited.

I had a couple experiences with InspireForm using Radioss underneath, and it generated a .sta file with the INISHE/EPSP_F (or STRS_F)and it also includes the thickness for each shell element.

I believe this is what you need to request in your first run, to output the state file for this.