The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
error:Contact "Contact 0" under "Mode1"references a flexbody graphic that contains T cconnections. Graphics with T connections are not al1owed in contact simulations. [Genera1]
Hello Weidong,
Thank you for reaching out. The flexbody graphic is referenced in the body entity editor.
You can also double check the connection of the contact.
The error does indicate that the flexbody file that was generated has T connections. Please go through the original file that was created in a FE tool (Hypermesh) and double check the mesh quality.
If your model only consists of the two helical gears, you could recreate this model relatively quick in Inspire Motion, apply motion constraints (joints/motors/actuators/springs/etc) and generate the flexbodies there.
Including some links: https://help.altair.com/inspire/en_us/topics/inspire/motion/motion_connections_c.htm
https://help.altair.com/inspire/en_us/topics/inspire/motion/motion_forces_c.htm
https://help.altair.com/inspire/en_us/topics/inspire/motion/flexible_bodies_c.htm
Best,
Christopher Fadanelli
Join us for a Community Conversation where we'll discuss practical approaches to analyzing complex electromagnetic models using hybrid solver techniques. This session will provide a general overview of how different computational methods can be combined within a single simulation to address models containing varied…
Join us for a community conversation to explore how different modeling approaches in Simcenter PSIM can help engineers simulate power electronics systems while balancing accuracy, simulation speed, and design insight. What you'll learn: Power transistor modeling : Thermal and high fidelity models Protection component…