The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
Hi all,
I don't know how to set up these parameters, can you guy teach me?
Thanks.
Hi Nancy,
The Card Image you provide in the first image is referring to /MAT/LAW21 and not /MAT/LAW10. You can find exact direction on what each parameter represents in the following link.
https://help.altair.com/hwsolvers/rad/topics/solvers/rad/mat_law21_dprag_starter_r.htm
So to set up these materials in HyperMesh you have to change the Card Image to M21_DPRAG.
Polyvios
Join us for a Community Conversation where we'll discuss practical approaches to analyzing complex electromagnetic models using hybrid solver techniques. This session will provide a general overview of how different computational methods can be combined within a single simulation to address models containing varied…
Join us for a community conversation to explore how different modeling approaches in Simcenter PSIM can help engineers simulate power electronics systems while balancing accuracy, simulation speed, and design insight. What you'll learn: Power transistor modeling : Thermal and high fidelity models Protection component…