How to remesh after change MC option

Alex Nguyen
Alex Nguyen Altair Community Member
edited October 2020 in Community Q&A

Hi every one. I'm a newbie with SimLab. I have problem with re-mesh after modify value MeshControl (MC).

First, I create Mesh Control by IsoLine with as video. Next, I change value in MC, and I use option 'Remesh' to operate mesh.

But, the mesh seem not like request in MC (after modify). Do I have to delete all mesh and re-operate again or do anything else?

Thanks for interested

Best Regards

Unable to find an attachment - read this blog

Tagged:

Answers

  • Kamalraj
    Kamalraj
    Altair Employee
    edited August 2019

    Hi, I am not able to see your video. 

     

    Hope you have follow below steps, please correct me if wrong.

    • You have applied the Isoline mesh control to a CAD body and generated surface mesh on it.
    • Then you have modified the existing Isoline mesh control that applied on CAD body and you have tried remeshing corresponding FEM faces. this wont work.

     

    Because, the modified mesh control still is on  CAD and you remeshed FEM faces. For this case, you have apply a new isoline mesh control on FEM faces and then perform remesh for those faces. 

Categories