Altair RISE

A program to recognize and reward our most engaged community members

Nominate Yourself Now!

Hypermes 2023 export to moldflow

We were working with release 2017 of Hypermesh and evrything was find when exporting to moldflow

Now we are testing the 2023 release and we have seen that everything is changed and we can't find how expport to moldflow without error

We have seen tha the 2022 version of Hyperworks has the old version of Hypernmesh 8and the export is ok) and the new (starting from Hyperworks) and this one is bad.

Do you have any idea / suggestions

Thanks

Sergio

Find more posts tagged with

English

HyperMesh

Accepted answers

All comments

Fred_Juras

Hi Sergio,

Please start to use this new interface which takes place of the legacy interface. Further information here: https://web.altair.com/new-hyperworks-experience

The moldflow interface is still available from the 'Altair HyperMold' solver interface. Cf. screenshot below:

Once you've done this selection, you should be able to export a moldflow solver deck.

Regards,
Fred.

Sergio DELL'AMICO

Hi Sergio,

Please start to use this new interface which takes place of the legacy interface. Further information here: https://web.altair.com/new-hyperworks-experience

The moldflow interface is still available from the 'Altair HyperMold' solver interface. Cf. screenshot below:

Once you've done this selection, you should be able to export a moldflow solver deck.

Regards,
Fred.

Hi Fred

This is exactly what we have done.

but we cannot export to moldflow. (there isn't any export to.udn)

thanks

Sergio

Fred_Juras

Hi Sergio,

My mistake. In order to export udm file, you must use the export tool from the Utility tab (View menu > Utility tab). Review screenshot below:

Fred.

Sergio DELL'AMICO

Hi Sergio,

My mistake. In order to export udm file, you must use the export tool from the Utility tab (View menu > Utility tab). Review screenshot below:

Fred.

hello Fred

Now is better we still have some issue

We have created a new propriety with the tab in the model utility but we got the error attached.

Now we are trying to create the propriety with other tab

thanks

Sergio

1.png

Sergio DELL'AMICO

hello Fred

Now is better we still have some issue

We have created a new propriety with the tab in the model utility but we got the error attached.

Now we are trying to create the propriety with other tab

thanks

Sergio

Hi Fred

we have done some test

we could have a succesfull export but with this step

Create a propriety from the new tab
in the utility tab go to "assign existing card"
assign the propriety
again in the utility tab export to mold flow

It's a mix of new and old command

We also see that assign the materials take a very long time, is it normal?

Thanks

Sergio