errors in my baja buggy simulation
Altair Employee
*** ERROR # 1026 *** in the input data:
Duplicate ID's not allowed.
************************************************************************
There were 2 error messages during input processing.
The first message is repeated below:
*** See next message about line 104117 from file:
C:/Users/Ketan/Desktop/hyperworks first mesh results/new mesh/half cut with midsurface66@mesh.fem
'CTRIA3 97499 1 91469 19215 91469'
*** ERROR # 1026 *** in the input data:
Duplicate ID's not allowed.
Answers
-
Hi,
some element share the same ID which is not allowed.
You can renumber element IDs using Tools>Renumber>Elements
Or go to Options (Press O on your keyboard)>Mesh>'allow duplicate IDs'
<?xml version="1.0" encoding="UTF-8"?>
Bad element quality can also be a reason for this error.
https://community.altair.com/community?id=community_question&sys_id=fd860c3a1b2bd0908017dc61ec4bcbc10 -
Simon Križnik said:
Hi,
some element share the same ID which is not allowed.
You can renumber element IDs using Tools>Renumber>Elements
Or go to Options (Press O on your keyboard)>Mesh>'allow duplicate IDs'
<?xml version="1.0" encoding="UTF-8"?>
Bad element quality can also be a reason for this error.
https://community.altair.com/community?id=community_question&sys_id=fd860c3a1b2bd0908017dc61ec4bcbc1I am also facing the same issue I tried both the option you said sir . But still didnt get it error free. Alos my mesh is a 1d mesh so I think no chane for any qualit issues. If you could please solve it it would be great
0 -
Amith Anoop Kumar said:
I am also facing the same issue I tried both the option you said sir . But still didnt get it error free. Alos my mesh is a 1d mesh so I think no chane for any qualit issues. If you could please solve it it would be great
0
