*** ERROR 14: Missing property # 1 referenced by CQUAD4 # 1.

Altair Forum User
Altair Forum User
Altair Employee
edited October 2020 in Community Q&A

Hi,

I'm newbie, I was simulating the thermal transfer ( flux + convection ) follow it's tutorial. And I had a error:

'*** ERROR 14: Missing property #    1 referenced by  CQUAD4 # 1.
 *** ERROR 14: Missing property #    1 referenced by  CQUAD4 # 2.
 *** ERROR 14: Missing property #    1 referenced by  CQUAD4 # 3.'

I don't understand that so can anyone help me ? Thanks.

I used Tetra (Tetra mesh) element type and tried to redefining the property and material for components.

Unable to find an attachment - read this blog

Tagged:

Answers

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited September 2018

    You should assign the required property (it depends from your kind of analysis) to the component which contains CQUAD4 elements

     

      image.png.fed3bd4163b9e712855bff4b0410037e.png

  • Pranav Hari
    Pranav Hari Altair Community Member
    edited September 2018

     

    Altair Forum User said:

    Hi,

    I'm newbie, I was simulating the thermal transfer ( flux + convection ) follow it's tutorial. And I had a error:

    '*** ERROR 14: Missing property #    1 referenced by  CQUAD4 # 1.
     *** ERROR 14: Missing property #    1 referenced by  CQUAD4 # 2.
     *** ERROR 14: Missing property #    1 referenced by  CQUAD4 # 3.'

    I don't understand that so can anyone help me ? Thanks.

    I used Tetra (Tetra mesh) element type and tried to redefining the property and material for components.

     

    Hi Phat Vu

     

    I checked your file. This error is due to the presence of Quad4 shell elements in your model which has no defined property.

    Try deleting the quad4 elements using Delete > Elem > by config > quad4 and then run the analysis.

    The analysis has completed from my end.

     

    <?xml version="1.0" encoding="UTF-8"?>image.thumb.png.5d4d089712734cbed743b2abea29647f.png

    Unable to find an attachment - read this blog

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited September 2018
    Altair Forum User said:

     

     

    Hi Phat Vu

     

    I checked your file. This error is due to the presence of Quad4 shell elements in your model which has no defined property.

    Try deleting the quad4 elements using Delete > Elem > by config > quad4 and then run the analysis.

    The analysis has completed from my end.

     

    <?xml version="1.0" encoding="UTF-8"?>image.thumb.png.5d4d089712734cbed743b2abea29647f.png

    Thanks for your help. I forgot it when I transferred 3D mesh from old component to new one.

Categories