*** ERROR # 1000 *** in the input data: Incorrect data in field # 4.
Altair Employee Hi, I have a problem with optistruct..
There were 4 error messages during input processing.
The first message is repeated below:
*** See next message about line 4624 from file:
C:/Users/kjm96/Desktop/Frame/HW/FRFInal.fem
'PWELD 7 1'
*** ERROR # 1000 *** in the input data:
Incorrect data in field # 4.
I did assign all of property and I can't find the error
thank you
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
Answers
-
Hi,
Can you remove the Beam section and provide the Diameter and check if that helps?
0 -
hmm I can't understand 'remove the Beam section and provide the Diameter'
How can I provide the diameter to CWELD after removing the beam section.?
<?xml version="1.0" encoding="UTF-8"?>
0 -
could you add .out file?
0 -
Hi, it may be lastest file
thank you
0 -
Hi @James Kim
Can you share the model file, please?
Please use the file transfer link in my signature to share the model file
0 -
I sent the files. Thank you for your help.
0 -
Hi @James Kim
Is there a reason for using CWELD elements?
I think it is better to user CBEAM or CBAR elements instead of CWELD.
0 -
I want to see yield strength in my frame structure more detail not a , and I thought I had to use line mesh to connect the link in middle of the frames.
j1 is beam analysis. but result value is so low, so I want to set my files more details.
<?xml version="1.0" encoding="UTF-8"?>
0 -
You can connect with beam elements instead of CWELD.
0 -
Sorry for lost questions.
I replace all of CWELD to beam, and want to connect with beam but there is no nodes on beam and I can make a node on beam ..
<?xml version="1.0" encoding="UTF-8"?>
0 -
it's interesting phenomena, split element doesn't work for 1 d element=)
0 -
How about remeshing those elements so that you get a connecting node?
0 -
Altair Forum User said:
it's interesting phenomena, split element doesn't work for 1 d element=)
I think F6>split working for 1D
0
