Responses

Altair Forum User
Altair Forum User
Altair Employee
edited October 2020 in Community Q&A

I am Ing. Andrés Palacios,

please, if you can, help me with information about 'Responses' of Hypermesh responses, what they are and how are used in the optimization tab, such as mass, volume, static force, beadfrac and the other, for a thesis of master. thank you very much

Tagged:

Answers

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited November 2020

    Hi,

     

    Responses are measurements of system performance like displacement, stress, etc...

     

    You can refer to the attached document for responses used in optimization

    Unable to find an attachment - read this blog

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited January 2017

    Thank you very much

     

  • Faisal
    Faisal Altair Community Member
    edited November 2020
    Altair Forum User said:

    Hi,

     

    Responses are measurements of system performance like displacement, stress, etc...

     

    You can refer to the attached document for responses used in optimization

    Could you please share this pdf again, i can not find this. 

    Unable to find an attachment - read this blog

  • Adriano A. Koga
    Adriano A. Koga
    Altair Employee
    edited July 2020

    Just use your Help for OptiStruct and search for 'Responses'. You will find it under the OptiStruct User's guide

    <?xml version="1.0" encoding="UTF-8"?>image.thumb.png.9c09fdce41345b4afcf5887d7c67c575.png

  • Faisal
    Faisal Altair Community Member
    edited July 2020
    Altair Forum User said:

    Just use your Help for OptiStruct and search for 'Responses'. You will find it under the OptiStruct User's guide

    <?xml version="1.0" encoding="UTF-8"?>image.thumb.png.9c09fdce41345b4afcf5887d7c67c575.png

    Thank you so much.

Categories