Dear all,
I am trying to output modal strain energy for a component. Despite having followed the manual carefully, I am still unable to see modal strain energy results in the h3d file when I view it on Hyperview. Though I can't share my model files due to privacy, below images show the settings I use for the load step. I also show the mode set settings, as I intend to output modal strain energy only for the first mode.
What I basically do is I define a load step of the type freq. resp (modal) with a method (struct) that is EIGRL (the first 15 modes, excluding rigid body modes). No spc. Analysis type set to MODES. For OUTPUT, I select only MODALSE. Please see below images for details on the settings I am using.
I have also tried adding an OUTPUT control card with settings H3D, ALL, BYITER. Unfortunately, I was still unable to print modal strain energy results in the result file.
I would appreciate any information on how I can print modal strain energy values in the result file.
Best regards,
Deniz Bilgili
Note: I am using Hyperworks 17
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
