unable to solve ERROR # 605

Altair Forum User

Hello,

 

I am receiving this following error message:

 

ERROR # 605

Element 917177 is referenced by STACK 1 (on PLY 2) and by
 STACK 2 (on PLY 12) simultaneously.

 

I looked at previous topics about this error message and checked the stacks to make sure the same ply is not used in both stack 1 and 2. 

But I am still having difficulty in finding and changing the ply property of the element in the error message.  Does anyone know how I should proceed to solve this error?

 

Thank you

 

Muge

Altair Forum User

Hi Muge,

When you run a model with multiple stacks (laminates) and one of the plies has no element set define, it results in a confusing error that elements are in multiple stack cards. It looks like OS assumes all elements (of a laminate?) are referenced on a ply without a set.

 

Try to recreate PLY2 and reference again.

Altair Forum User

Hello Prakash, 

 

Thank you for your reply. I tried recreating PLY 2 but I am still getting the same error message. I also double checked and made sure that each ply has a set. Any other recommendation would be greatly appreciated.

 

Thank you very much,

 

Muge Candogan

 

 

Altair Forum User

Hi,

 

Is it possible to share the model file?

 

Please use the file transfer link in my signature to share the model file. 

Altair Forum User

I shared the model file, thank you very much.

 

Muge Candogan

Altair Forum User

Hi Muge,

 

Plys which share same elements cannot be used in different laminates. In your case Ply ID with 12 and Ply ID 2 share common elements

Altair Forum User

Hi Prakash,

 

How can I locate the shared elements and how can I eliminate those in one of the plies? 

 

Thanks,

 

Muge Candogan

Altair Forum User

You can review the plies to easily identify the elements or use review of sets.

Altair Forum User

In the error message it says element 917177 is used in both PLY 2 and PLY 12 however when I review the sets I can't find such element. I also checked other plies, this element is not in any of them. Is it possible that error message is giving a wrong element number?

 

Thanks,

 

Muge Candogan

Altair Forum User

Hi Muge Candogan,

 

Please see this video. I reviewed both element sets and they have same elements. 

Unable to find an attachment - read this blog