Hello, everybody, i´d like to ask something about the recommendation that you gave me a few days ago, if you remenber the simulation it is about the three blocks made of Neodymium BMT_N52, two blocks are fixed and the third one is located about 200mm down, the third block it gonna move along until is near to the others (+- 1 mm).
for made this model i create a 2d sketch, just like explain before in the file attach.
I made the regions advised, but when i goint to run the simulation the uotput shows me this message.
'Begin of physical check ...
The parameter H of scenario SCENARIO_1 is defined as geometric parameter whereas it does not modify the geometry.
*** Please, use a I/O parameter to control a scenario parameter describing the physics. ***
End of physical check.
The parameter H of scenario SCENARIO_1 is defined as geometric parameter whereas it does not modify the geometry. *** Please, use a I/O parameter to control a scenario parameter describing the physics. ***Impossible to solve problem'.
what i have to do to fix this case. I attach the file this made in 'flux 12.3.1'.
thank you for any kind of suggestion who make me solve this...
Unable to find an attachment - read this blog
