The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
@Deep
we are reducing mass of pitman arm so my question is what is the difference between mass and mass fraction, volume and volume fraction??
Kunal,
Volumefrac / MassFrac response is the material fraction of the designable material volume.
Volume / Mass response is the total volume, which includes design and non-design volume.
Krunal,
Both the terms actually describes fraction of initial design space in topology optimization. Both are global responses with the range 0.0 to 1.0.
Mass fraction includes non-design space in fraction calculation whereas volume fraction only considers design space.
Please have a look into the image for reference.
(Image Courtesy: http://www.altairhyperworks.in/product/OptiStruct)
Courtesy: Typical optimization process on VW compressor bracket
<?xml version="1.0" encoding="UTF-8"?>
Join us for a Community Conversation where we'll discuss practical approaches to analyzing complex electromagnetic models using hybrid solver techniques. This session will provide a general overview of how different computational methods can be combined within a single simulation to address models containing varied…
Join us for a community conversation to explore how different modeling approaches in Simcenter PSIM can help engineers simulate power electronics systems while balancing accuracy, simulation speed, and design insight. What you'll learn: Power transistor modeling : Thermal and high fidelity models Protection component…