A space for simulation related technical resources and discussions.
lng tank pressure prediction with reduced order thermodynamics model Ed Wettlaufer – Sr Technical Specialist, Altair Engineering, April 19, 2023 Introduction Natural gas is recovered from rock formations below the surface of the earth and is a byproduct of oil exploration and processing. To transport it over long distances…
One of the key drivers for electric drives adoption is the high level of efficiency they provide. Thanks to power electronics and digital control, electric drives can be tuned and optimized to improve sustainability and reduce the energy consumption that is required to produce mechanical actions. For electric cars or any…
EV Charge Controller Design Ed Wettlaufer Senior Technical Specialist Jacob Hammitte Project Engineer – Mechatronics Background – AFREECAR – Mobility and Freedom for All the World Mobility improves quality of life by providing access to people, places, and experiences. It also enables economic advancement by providing…
Design and Development of Digital Power Supplies and Power Conversion Electronics Ed Wettlaufer Technical Manager – Mechatronics Jacob Hammitte Project Engineer - Mechatronics Background The mobility of a society improves quality of life by providing access to people, places, and experiences. It also enables economic…
EV Range Prediction with Multi-Disciplinary Systems Simulation Ed Wettlaufer Technical Manager - Mechatronics Background – AFREECAR – Mobility and Freedom for All the World Mobility improves quality of life by providing access to people, places, and experiences. It also enables economic advancement by providing access to…
In this article, we will discuss what to do when S-FRAME loads with a black screen. This is related to a corruption of the initialization file data, and is very easy to resolve. Symptom: This behavior will manifest itself as shown in the images below: Open Structure Window: S-FRAME Visual Editor Window: Solution: Since the…
Before a crash load case, a pre-simulation should be done to adjust the penetrations, intersections, and position between the Dummy and Seat parts. In Altair HyperWorks, there is a feature called Dummy pre-simulation with seat where you can do both simultaneously.
Hi all, We have a new Instructor Led Training offering about “Altair HyperWorks for Post-Processing”. For more comprehensive information about “Altair HyperWorks for Post-Processing”, please visit the Altair Learn site (https://learn.altair.com/) under Class Schedule to check for scheduled sessions and register if you are…
Let's hear from Dr. Ming Zhou, Chief Engineer - Computational Mechanics and Design Optimization about Altair’s solutions for the digital transformation of the entire plastics industry supply chain. [Interview at K show 2022 Preview] https://www.youtube.com/watch?v=GrElZON3LqM Download the eBook for a step-by-step guide for…
This article is an overview of how to run CADFEKO [LEGACY] in 2022.3. CADFEKO has been refactored to include an improved graphical user interface, effective workflows and many new features. For users that still want to use CADFEKO [LEGACY], it is still included in the Feko 2022.3 installation. Note: CADFEKO [LEGACY] will…
There's a wealth of content waiting for you to explore! Need support or have a question? Login or join our community.