-
Automatic Curves Export after simulation
Hi, I'm currently running simulations on MotionView 2022.1. I have multiple outputs i want to export in .CSV format. To do that, i select my curve in the plot window and select : export curves. I do that one by one for each output i need to export. I there a solution to "automatically" export selection of outputs in a .CSV…
-
How to change the number of significant digits in the exported near fields file in Altair FEKO.
Hello everyone. I am looking for your help. I've tried absolutely everything and can't find any information. When exporting near fields (*.efe and *.hfe) the number of digits after the decimal point is always 8, I need to increase it to 16. In the settings of the solver I specified to save data with double arithmetic…
-
Exporting Free Body loads for multiple load cases change the coordinate system
Hi, The HM2024 model I'm working with has fasteners in different orientations. The analysis systems for the nodes attached to these fasteners have been updated to align with geometry. When exporting the FBD loads tables for all 14 load cases the first load case recognizes the correct CSYS but the remainder cases the loads…
-
Import IGES into Hypermesh with Component Names
Hi. I have an IGES file previously exported from Hypermesh (2021.1) using the Export Geometry option. Following were the export options AssemblyMode = groups OptimizeForCAD = off OuterLoop = optional When I try to import the same IGES back into Hypermesh, the components are separated, but their names are lost (replaced by…
-
Hyper Mesh → Export 実行時のExport Optionを再表示したい
お世話になっております。 標記の件、作成したFEメッシュを File → Solver Deck → ファイル名指定 → Export Option の順で操作するのがデフォルトになっておりますが、どうやらExport Option の最下段にある Do not show this dialog again に誤ってチェックを付けてしまった様子で、以降の作業ではExport Optionが表示されなくなってしまいました。 このExport Optionを再表示したいのですが、ヘルプ等を参照しても見当たらなかった為、質問させて頂きます。 ・Export Option の再表示の方法 ・上記の方法について記載のある場所…
-
Using Your Designed, Custom Sections in S-FRAME.
S-FRAME stores and displays different steel section databases, letting the user decide which sections are more fitting to represent and try different conditions. In common practice, the user tends to use these default databases, however, some projects and models require using sections with specific properties, outside of…
-
Importing Cable Harnesses
When importing a .cfx file, the Cable Harnesses don't appear to be imported. Is there a way to export and import Cable Harness instances?
-
How to change the number of significant digits in the exported near fields file in Altair FEKO.
I've tried absolutely everything and can't find any information. When exporting near fields (*.efe and *.hfe) the number of digits after the decimal point is always 8, I need to increase it to 16. In the settings of the solver I specified to save data with double arithmetic precision.
-
Export and Import Problems
Hi, When I export my process and sent it to a classmate. She has problems opening my process. It collapse everything into one icon. She is also not able to run the process. The difference is that I am on a Mac and she is on a PC.
-
Export only label and prediction in CSV
Hi I'm trying to export in CSV file the outcome label and prediction from the result. Unfortunately the operator returns all the dataset with including the label and prediction. Is there any way to filter only these columns?
-
How to convert log file to exampleset?
Hello, I am using a log file to record my modeling results(i.e, training, recall, precision etc.). It works well but I want to convert that to example set so that I can export it later. I am using Log to Data operator but it doesn't produce the output I was looking for. I am using them inside a Optimize parameter process.…
-
How to transfer and load rmhdf5table?
Hi dears I usually find ".ioo" files in windows explorer and copy them to transfer to another computer and copy the file into the destination RapidMiner folder. Then I refresh the RapidMiner repository and I can see my file and use it again. This procedure doesn't work for ".rmhdf5table". It seems the refresh command on a…
-
Write PMML file for logistic regression
Hi, In the write PMML operator description it says that it should be possible to export logistic regression models, however I'm geting this error whenever I try. "The class LogisticRegressionModel_v2 cannot be exported to pmml." Also, is there a way to export tree based models such as random forest and gradient boosted…
-
Export to Excel
Hi friends, I have a question, could I write to excel 5 different types of searches on twitter on a only one excel file??
-
where are the data files located in Windows 10 file system
Trying to find the files in the Sample files/data. Also, having trouble exporting to excel file. I clicked on the folder but doesn't seem to let me save.
-
Export Example set and Performance Vector
Hi guys, as part of my sentiment analysis I am receiving results in the "Results" tab, which are named "PerformanceVector (Performance)" and "ExampleSet (Apply Model(2)). I want to export them into an Excel file exactly as shown in the two pictures below, so exactly the way they are in the Results tab. But when I e.g. use…
-
How to encode all apostrophes when exporting CSV file
Hi rapid miner community, at the end of the process, I use write CSV operator. When looking at the result, apostrophes are missing: Do you know how to encode apostrophe "' ' " in rapid miner ? best regards
-
as excel format :short date and accounting
Hi dears could you please show me how to change date as MM/DD/YYYY or as shown in the attached file? and columns b,c,d and e as accounting? I wonder how to change them in RM. Thanks
-
exporting excel file ad csv
Hi dears Would you kindly please show me if I can export a excel file to a csv file foramt?--by rapidminer Thanks
-
How to export document collection to excel
I am working on a topic modeling (LDA) project and I get the I00bjectCollection after cleaning the text (tokenize, stopwords, stem..etc). These documents look like this (see attachment). I want to export these cleaned documents into excel and then use R to generate an intertopic distance map using LDAvis package. Does…
-
Exported Image does not display the chart itself
Hi all, some of my colleagues and I have a issue to export an img as svg or png/jpeg. The chart itself is always missing while the RapidMiner Studio is still visible. I have 12 dimensions, but only 10 selected. First picture is the exported picture and the second a screenshot. thanks in advance
-
How to extract a specific part (section) from a large text (txt format)?
Dear RM Friends, I have 500 txt files containing large Reports and I need to extract only one section of these Reports. As the Reports are each slightly different, the only common patern I can recognise is that the section' headline by all start with the same 3 words, but in the end of each something different is written…
-
Help with Write Excel command
I'm a novice RapidMiner user and I just ran a text analysis process which worked just fine. However, I'm now trying to export the results to excel using "write excel" but it's giving me errors. Can anyone please help? Thanks
-
Export dendrogram from a cluster / label leafes of dendrogram
Hello everyone! I tried to apply a hierachical cluster on my data and the output was an dendrogram. My problem now is that none of the leafes of the dendrogram is labeled with an info (I dont know which leaf belongs to which data) and I couldn't find an option to export my dendrogram into an file (for example excel).…