-
ERPPNL input entity
Dear Community! I use solid element sets as input entity for ERPPNL and the solver automatically detects outer side of the elements and calculating surface normal velocity for that, which is usually working fine, but some times I'm facing a high sensitivity of the orientation of the solid element for the calculated surface…
-
How to paste(merge) 2 nodes in hypermesh?
Hello Everyone, I am new to hypermesh, is there an option to paste 2 nodes together? I know about equivalence but for that the nodes should be in the tolerance limit. Can we manually select 2 nodes to be pasted?
-
How to simulate a non-flat surface
Hello, As you can see throw the attached file, I a m trying to simulate a LC circuit to find de reflexion coefficient. It is working but I want to upgrade it. The top electrode of my capacity is on a membrane that can deform. And I would designe the top electrode with this defomation. But this deformation is neither a…
-
Equivalent qsub command for drmaa2 job
Hello, I'm using DRMAA2 APIs to submit and monitor jobs to Altair Grid Engine. I was wondering if there any way to get qsub command that is equivalent to DRMAA2 job ? This would be helpful for debugging issues outside DRMAA2 API calls.
-
Bird strike example
Hello, I am doing this example https://altairuniversity.com/26447-bird-strike-analysis-on-an-aircraft-leading-edge-using-sph-bird-model/ However, I am stuck on the following step: The loads and boundary conditions for the model are created now. From Utility Menu, select BCs Manager. Provide a name for the load collector…
-
Altair Grid Engine および ALM (License Manager) 関連のドキュメント／モジュールのダウンロード
Altair Grid Engine および ALM (License Manager) 関連のドキュメント／モジュールは、Altair One よりダウンロードが可能です。 1. Altair One (https://altairone.com/Marketplace) にアクセスし、sign in します。 2. All Apps から Altair Grid Engine を選択します。 ＜Altair Grid Engine のマニュアル／モジュール＞ - Download を選択し、マニュアルは Documents で、モジュールは Suite Version および Operating System…
-
modelling of Venturimeter
what should be the hydraullic dia considered for finding the boundary layer parameters for flow through venturimeter Should it be pipe dia or throat dia ?
-
Fluxskew
Bonjour j'ai un model Flux2D je voudrais tracer la FEM et le couple de crantage j'ai un model classique Flu2D comment le passer du model classique en incliné? merci
-
create a tcl script to extract displacement of nodes in optistruct
running non linear optistruct model with contact and need a script to run after completion of the analysis and automatically extract nodes displacement.
-
Export a model status from impact simulation to re-start a simulation in Optistruct
Dear All, I have a model from dynamic impact simulation. I would like to export the final status and start a new simulation of fatigue in Optistruct. Do you think it's possible? How can I proceed? Thanks a lot, Fabio
-
How can I get the impulse response about received signal power by using Winprop API
Hello, everyone. Recently, I have been studying how to use the WinProp API, but I have encountered a problem. I found that the WinProp API cannot help me output impulse response data containing the received signal power. The channel impulse response it outputs is represented in field strength. How can I obtain channel…
-
PolyNurbs Optimisation Results in Model Browser
After running a PolyNurbs optimisation, the option to select the alternative design in the model browser appears. When inspecting the optimized component in the analysis window, it is noticeably different, and thicker in quite a few places. Outside of the analysis window however, the optimized variation appears exactly the…
-
How do I Couple Ansys Fluent With EDEM
Hello. I have just begun using EDEM but my research requires a continuum fluid inside the simulation in which EDEM cannot provide. Thus, I need to use Ansys Fluent but I do not know how to couple both software for the simulation. I have only seen the post simulation from internet but not the process. Is there a guide…
-
Problems with .lua scripting
Hello, I try to write a .lua script in order to automatize the creation of a scene. For instance, I can add a cuboid to this scene, then translate it and scale it (cf. "Script1.lua"). It's then appreciable to use the macro recording to understand the feko lua coding. But in this case, I have the messages " Macro recording…
-
How to place monopoles on a vehicle
I need to place a set of monopoles of a given length on a vehicle. One end of each monopole needs to touch the surface of the vehicle. The surface of the vehicle is irregularly shaped. It is easy to place monopoles on a flat surface, where the location of the surface is easily determined, but it is difficult when the…
-
How load CAD geometry profiles in to Hyperbeam
Hi, Is there an option to load directly cad step files in to the hyperbeam to calculate the section geometry properties? Thanks, Karthik Kandra.
-
What is the difference between RBE-2 and RBE-3 elements ?
If one has to apply boundary conditions to holes shown as the attached photo then Which RBE should be used ? In general for providing fixed support, certain displacement or load should one use RBE-2 or RBE-3 ?
-
How to control object motion by editing a project file with external software instead of using the GUI
WinProp can simulate time-variant scenarios in which geometry objects are moving. Such movement is typically defined in the WallMan GUI and stored in the .idb file, which is a binary file. Advanced users may wish to be able to modify the movement through external software. For instance, in a simulation of automotive radar,…
-
What is the method to use a Proximity Sensor in Motionview?
I've been unable to find a way to apply a Proximity Sensor in Motionview. Are there any examples of using this functionality? Is this only available in Inspire? Sensor: Proximity Model Element The Sensor_Proximity element defines a sensor between two bodies which monitors their minimum separation. The sensor tracks the…
-
3D extruded mesh problem for round conductor
Dear Flux community, I am now building a 3D model by extruding the 2D geometry with associated mesh generator. The aided mesh is deactivated and all the mesh information is defined and assigned to the geometry manually in 2D to avoid problems in 3D modelling. My problem is that, the mesh for round conductor in 2D is OK…
-
Help!!! Some unusual FLUX 3D ERROR message
Dear Flux community, I am modelling a FLUX 3D model in steady state AC magnetic 3D context. The model uses rectangular bar conductor and it has real end-winding connection and a coil conductor is used to represent the winding region in the electrical circuit with input and output defined properly (see the diagram…
-
I don't know what happen, the screen view just turned black (see below)How can I go back to the standard S-Frame View.?
-
is there a way to check summary of total applied pressure on the FE model
-
How to build a motorette model (2 slots, 1.5 stator tooth) in FLUX 3D context?
Dear Flux community, I am now trying to build a motorette model which has no rotor and two slots and 1.5 stator tooth, please see the attached diagram for detailed information. All the parts (volume region) are stationary. I have already finished all the building and have checked the physical, geometry and electrical…
-
DXF Import/Export Utility in S-FRAME Analysis - Tips & Tricks
DXF Import Utility in S-FRAME If you are experienced with S-FRAME and happen to use AutoCAD or a similar CAD platform, you may have seen there’s an Import/Export Utility in S-FRAME to facilitate the exchange of model data between both software. This is particularly useful if you have a model in a CAD software and require…