-
Forces in seam welds - is it possible to view them in welds local coordinate systems
Hi, I am working on a design where I have a circular pattern of seam welds connecting two parts. Is it possible to view the components of forces and moments acting in the seam weld in a local coordinate system, defined for each weld? I am only able to display the results in the global coordinate system. Thank you, Piotr
-
3次元曲面転写ラインを2次元平面展開する機能
3次元曲面を有するFEモデル（シェル要素）の曲面転写ラインを2次元平面に転写する機能はありますでしょうか。
-
Acoustic Mesh & Acoustic Boundary
Hello, During my PhD thesis, I need to simulate vibro-acoustic behaviour of a PMSM. Therefore, forces are exported from Flux 2D and Frequency Modal Analysis is done and acceleration on the motor geometry is available, yet I need to simulate the acoustic noise around my motor at any arbitrary point. My main question is how…
-
Radioss Type7 has a surface "smoothing" function Icurv. Has anyone found this to work for any of the options?
I am quite familiar with using Abaqus and this has a very useful option called "geometric smoothing for curved surfaces". Examples below: The effect is to push flat element faces to match the curvature of the curved geometry and align nodes onto the geometric surface, which provides more realistic contact distribution.…
-
Altair Inspire crashes when trying to view Print3D simulation results after a succesful calculation
*Actual Inspire version is 2019.4 but it is not in the drop down menu. Dear sirs, I resend my message as I am unsure whether replying to a solved case thread went through. Can you help with my crashing issue when viewing Print3d simulation results? Also, referring to my previous message, I know that in order to create…
-
How can I Create a Patch Manually for Separate Volumes? Ref: NVH-1000 tutorial
The NVH-1000 tutorial, step 9, asks me to create a patch manually for separate volumes but gives no instructions on how to do this. I've tried a few things without success. Could someone walk me through this? For Altair: I think this tutorial needs updating.
-
Running CMA using Feko, and it is stucked in Mesh
I am using FEKO to do Characteristic Mode Analysis. I followed up with a video presrented by Peter Futter. I create a rectangular, setup the frequency range(0.6-2GHz, 21points), add the characteristic mode analysis(10 modes), add symmetry definitions and assign the edges to local mesh. Then I click the create mesh, the app…
-
Simmetry Plane for PolyNurbs wrap structures
Hi, I'm modeling polinurbs over the result of a stiffness optimization on a pedal. I set up the simmetry costraint before running the analysis since of course the pedal needs to have a simmetric shape considering its medium plane and the results came out simmetric as expected. Once I move to Polinurbs tho there's no way to…
-
I have preprocessed a database for a simulation with IRT model (urban scenario) to calculate the path losses in an urban area. Is it possible to evaluate again the path losses in the same area with IRT model but without the buildings (to quantify the
-
Error: The material file is corrupted or deprecated.
When I open Inspire Cast 2019.3.1, I have this mistake: I am using Windows 10 and I have Folder Redirection of My Documents to a network folder. I think that´s the problem Any idea?
-
What are the commands to run FEKO in the Linux terminal?
I would like to have a list for commands to run and edit FEKO through the terminal. They are not available through the website.
-
How to properly create stripline designs surrounded by dielectric substrate (not air)?
I'm trying to simulate the stripline parallel-coupled bandpass filter design presented by the attached slides (pg. 28 and 29), but I keep getting incorrect results - I've tried this implementation in CADFEKO (finite substrate) and EDITFEKO (Greens function/inifite substrate) but they don't give me the corresponding…
-
How can I get inspire to start?
Hi, I am having trouble getting Inspire Studio to run on my PC. I have a Surface Book 3. I have installed the software and downloaded the license file per the installation instructions given to me. When I open inspire, it just shuts down a second after opening. Sohini
-
*** ERROR # 941 *** NON-CONVERGENT NONLINEAR ITERATIONS FOR SUBCASE 1
Hi, I met the *** ERROR # 941 *** when I was doing a non-linear analysis. This is material non-linear. No contact or large deformation is defined. This is the first time I met the problem. *** ERROR # 941 *** NON-CONVERGENT NONLINEAR ITERATIONS FOR SUBCASE 1 Suggestions: (Scratch disk space usage for starting iteration =…
