Differentiating output request between inertance, mobility and receptance

Hello,

 

I am using Optistruct to numerically calculate some FRFs. I have test data to validate my numerical results. Measured test data is an FRF data in the form of Inertance (acceleration/force). I see that there is a big gap in frequency components' amplitudes between the measured data and numerically calculated data, though calculated and measured natural frequencies align very well.

 

I have followed the modal frequency response tutorial and nowhere in the tutorial is it shown that we're specifically selecting the type of FRF we're wanting (e.g. inertance or mobility or receptance). GLOBAL_OUTPUT_REQUEST is used with DISPLACEMENT enabled and that makes me think that, what I am calculating in Optistruct is Receptance and not Inertance. I tried to request ACCELERATION instead of DISPLACEMENT, but ACCELERATION doesn't let me select the output node set which I used for DISPLACEMENT.

 

How can I make sure in Optistruct that the numerical data I'm getting is inertance and not mobility (velocity/force) or receptance (displacement/force)?

 

Best regards