Inspire Motion. How to place a marker to study displacement of an assembly.
How to place markers on an assembly to study motion/displacement at different locations?
Best Answer
-
Hi Raj,
You can place a "System" (Structure --> System) on a part and obtain various output results from it, including displacement. Systems can also be used in a motion analysis.
Hope this helps you.
Regards,
Scott
0
Altair EmployeeAnswers
-
Hi Raj,
You can place a "System" (Structure --> System) on a part and obtain various output results from it, including displacement. Systems can also be used in a motion analysis.
Hope this helps you.
Regards,
Scott
0 -
Scott Ziemba_21777 said:
Hi Raj,
You can place a "System" (Structure --> System) on a part and obtain various output results from it, including displacement. Systems can also be used in a motion analysis.
Hope this helps you.
Regards,
Scott
Thank you, Scott. I will try it.
0 -
Yes, it did work. Thanks.
0 -
Raj,
Here is another article on using Systems:
https://community.altair.com/community?id=community_blog&sys_id=6a55c9371bcdbc90c4dfdbd9dc4bcbdf
Regards,
Scott
1