Inspire Motion. How to place a marker to study displacement of an assembly.

Raj Deshpande

How to place markers on an assembly to study motion/displacement at different locations?

 

Scott Ziemba_21777

Hi Raj,

You can place a "System" (Structure --> System) on a part and obtain various output results from it, including displacement.  Systems can also be used in a motion analysis.

 

Hope this helps you.

Regards,

Scott

Scott Ziemba_21777

Hi Raj,

You can place a "System" (Structure --> System) on a part and obtain various output results from it, including displacement.  Systems can also be used in a motion analysis.

 

Hope this helps you.

Regards,

Scott

Raj Deshpande

Scott Ziemba_21777 said:

Hi Raj,

You can place a "System" (Structure --> System) on a part and obtain various output results from it, including displacement.  Systems can also be used in a motion analysis.

 

Hope this helps you.

Regards,

Scott

Thank you, Scott.  I will try it.

Raj Deshpande

Yes, it did work.  Thanks.

Scott Ziemba_21777

Raj,

Here is another article on using Systems:

https://community.altair.com/community?id=community_blog&sys_id=6a55c9371bcdbc90c4dfdbd9dc4bcbdf

 

Regards,

Scott