How to set boudary condition?
Altair EmployeeHi, I have a question about boundary condition setting for this work.
Assume this is a chassis of truck and fixed.
1) How to set contact between surface and surface?
<?xml version="1.0" encoding="UTF-8"?>
2) How to fixed?
<?xml version="1.0" encoding="UTF-8"?>
I need to applied load to this plate with 0-100kN in 5 sec of time
3).How to applied?
<?xml version="1.0" encoding="UTF-8"?>
I tried the example but don't understand.
I make this with myself don't have adviser.
I would like you to help me, Thank you.
Find more posts tagged with
I suggest you go through free Altair e-books, start with Practical Aspects of Finite Element Simulation and then Introduction to Explicit Analysis using RADIOSS.
You can learn from learning and Certification program. Please follow below link.
https://certification.altairuniversity.com/ > (Learn Modeling and Visualisation)
check the following youtube channels:
AltairUniversity
Altair India Student Contest
ELEATION By Apoorv Bapat
1) How to set contacts? Analysis>interfaces
2) How to set boundary conditions and loads? Utility>BCs Manager
VI_e_Loads and Boundary Conditions in RADIOSS - Altair University
Have a look at tutorials? There're some useful tutorials with Hyperworks installation.