The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
For what reason meshing is need to be done in mid surface only
Hi Suresha,
One reason is to reduce to total number of DoFs compared with solid elements. Solid elements have 8 nodes and shell has only 4 (1st order elements).
Second reason is solid elements may not capture the geometry as good as shell elements specially in curvatures and fillets.
shell elements capture good bending behavior compared to solid elements. Solid elements will do capture but you need more number of layers of solid elements which means increased number of DoFs, time and disk space.
Not 'only', but 'often' /emoticons/default_smile.png' alt=':)' srcset='/emoticons/smile@2x.png 2x' width='20' height='20'>
In some cases, it's better to do simulation with internal or external surface of shell. In this case, for most FE solver, you have to take in account the excentricity of mesh comparing to mid-surface of shell structure.
Midsurface concept is used for most of the plastic parts (trims) and sheet metal parts. Extraction of miss ur face is done and 2d shell elements are used for midsurface meshing . Because of this method, user can assign the overall thickness (for the elements ) of the part which is assigned half to the upper side and half to the lower side. Shell elements also results in lesser computational cost as compared 3d meshing.
Join us for a community conversation on Pulse Width Modulation (PWM), a fundamental technique in electric motor control, and explore how different PWM strategies can yield significantly different results. This webinar provides a comparative analysis of various PWM methods and their effects on motor efficiency, torque…
Join us for a community conversation to discover the Advanced Iterative Solver(AIS) in Simcenter Feko and its application to electrically large and computationally demanding electromagnetic models. The session will provide a general overview of how iterative solution methods can help improve efficiency of large scale…
Join us for a community conversation on how High-Performance Computing (HPC) and Simcenter PSIM work together to meet the increasing demands of modern power electronics simulation. During this one-hour technical session, you'll discover how leveraging HPC can speed up simulations, improve scalability, and empower engineers…
