Altair RISE

A program to recognize and reward our most engaged community members

Nominate Yourself Now!

[Injection Molding] InspireMold stuck at meshing

Junta_20361

Hi,

I'm trying to use InspireMold 21.2.

I face a problem in the meshing stage.

The meshing always stuck at 10% for hours and it doesn't change anything at all.

Meanwhile, the memory taken is very high, some time can reach 100% although I have 12GBs RAM.

Does anyone face the same issue?

Please note that I use a very simple model from InspireMold tutorial (attachment)

Tensile_Bar.zip

Find more posts tagged with

English

Inspire Mold

v2021.2

Accepted answers

All comments

MilanRaval

Hello,

Please check if you are running at the location with enough disk space. As well as check whether your run is local parallel and local sequential run. You can access that by simple click on downward arrow under Analyze icon. If sequential, change it to local parallel and re-run that.

Regards.

Junta_20361

Hello,

Please check if you are running at the location with enough disk space. As well as check whether your run is local parallel and local sequential run. You can access that by simple click on downward arrow under Analyze icon. If sequential, change it to local parallel and re-run that.

Regards.

Hi,

The setting was local parallel already.

Actually, this error happens on both InspireMold and InspireCast 21.2, where they have a common new feature called "Simlab advance meshing".

The same model can be meshed quickly with InspireMold and Cast 21.1 within 10mins.