Is a there a way for me to export Z coordinates from a database?

I previously exported X and Y coordinates along with RF Power from a simulation I ran, but I need to export the Z aswell for all X, Y points in the database. I don't mean Z as in my defined solution height, I want the height at every point (height of buildings, vegetation…).

Thank you,

Carlos

Find more posts tagged with

WinProp

Accepted answers

Jaehoon

Dear Carlos,

If you want to have X, Y, Z coordinates of the database, you might use "Export" feature in WinProp WallMan as shown below.

However, I don't know the data format of the exported file is what you want.

Best regards,

Jaehoon

All comments

Jaehoon

Hello Carlos,

Let me understand your question first.

So you exported the RF power by checking "Additional Output of Results in ASCII files" in ProMan,

, and after the ProMan simulation, you had one ~.txt file which looks like below.

There, the X, Y, Z and RF power (received power) are listed in the .txt file.

Here your question is … "how to get the X, Y, Z coordinates of the buildings and all other objects in the indoor database?"

Please clarify your question.

Best regards,

Jaehoon

Carlos123456

Hello Jaehoon,

Thank you for your help. I'm happy to clarify. My database is an urban database where I ran some ProMan simulation. I exported the results of that simulation and got a .txt file like the one you showed. Mine, however only had X, Y, RF Signal Power.

Right now am I only interested in exporting the X, Y, Z coordinates for the whole database. For example :

Here Z is the height of anything at X, Y not the solution height I defined. So if there is wall at 9.5, -39.5 that is 20 m tall my X Y Z would be 9.5, -39.5, 20. If there is no structure there at all then 9.5. -39.5, 0 etc…