Altair RISE

A program to recognize and reward our most engaged community members

Nominate Yourself Now!

Pedestrian headform impact

smallai7

Hi, experts

Recently, I would like to reasrch and use the Hyperworks to simulate pedestrian headform imapct

Refer to tutorial on Altair website, CRASH-2200: Pedestrian Head Impact Simulation

after vehicle marking and positioning, I can preview any target point

However, under Export options , I have no idea what mater file i should chose for "Adult and Child Headform" , as the picture.

I appreciate your assistance

Find more posts tagged with

HyperMesh

Accepted answers

All comments

Jason_Craanen

Hello,

Please try these

smallai7

Thank you for your prompt reply.

Ihave complete the Export Setting, input the Adult/Child headform model.Therefore, I could select any impact point in the table, and preview headformandimpact position.

In the last step of Export options section, however, I chose Adult/Child headform model again into the master files. For the Master out directory, I click the folder icon and set to my desktop.

It show ”Main File is invalid or dose not exists for 168 out of 168 selected points” information.

I would appreciate it if you could help me with this.

Jason_Craanen

pedprepositioning_main_2025.1.0.16.mp4

Please refer to the following video

smallai7

Dear Jason Craanen,

Thanks you again for replying.

Since I have re-execute this process, the export result invalid. I would appreciate it very much if you could sent me following files. Let us try to find the problems.

Rigid_Adult_Headform_0000.rad
Rigid_Child_Headform_0000.rad
master_euncap_A-Headform_0000.rad
master_euncap_C-Headform_0000.rad

Thank you again for your time and consideration.

I look forward to hearing from you.