How to build a 1D model in Activate and add it to MotionView?

TedTsai

Hi Everyone,

In MotionView's 1D Vehicle System Models,
There are many models available.
For example, ABS, TC, ESP,
Assists in controlling vehicle movement.

Most of the co-simulation examples that can be seen are to make the MotionView Model into an FMU in Activate.
For example, MV-7010: Co-Simulation with Activate - Quadrotor Control

I want to know,
How to build a control logic in Activate,
And then convert it into 1D model for MotionView?

Thanks,
Ted

Product: MotionView/MotionSolve 2022.2.1

Orestis_YB

Hello @TedTsai,

@Christopher_Fadanelli has already shared with you basic examples on how to use Twin Activate FMU in MotionVIew and vice versa. If you are interested in the vehicle controllers which are used inside MotionView you can check their Twin Activate original model. You can find them in the installation directory ( C:\Program Files\Altair\2025\hwdesktop\hw\mdl\mdllib\Common\FMU_Library ). Under each folder there is the FMU source folder and in there there is an scm file which includes the Twin Activate model.

Hope this helps!

Best regards,
Orestes