The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
Hi,
I would like to know if there is a way to set the control cards automtically for all the simulations without doing it everytime.
Regards,
Punith Guptha
Control cards is different for different type of analysis/Model behaviour.Where you are struggling for defining control cards?For some analysis we have process manager & Basic FEA tools to minimize desk setup time.
Hi Rahul,
thanks for replying back. Actually I'm working on wheels, I have a set of simulations for linear and non linear quasi static analysis. I just want to set the control cards for elemental stress, strain, contact force, no elemnt check, screen, and units. Also please let me know if there is an option to set control card for reaction forces?
Ok I found the control card for reaction force. Let me know more about process manager.
For simple analysis use Basic FEA & for Dynamic analysis use Frequency process manager.See attached screenshot.
<?xml version="1.0" encoding="UTF-8"?>
Join us for a Community Conversation where we'll discuss practical approaches to analyzing complex electromagnetic models using hybrid solver techniques. This session will provide a general overview of how different computational methods can be combined within a single simulation to address models containing varied…
Join us for a community conversation to explore how different modeling approaches in Simcenter PSIM can help engineers simulate power electronics systems while balancing accuracy, simulation speed, and design insight. What you'll learn: Power transistor modeling : Thermal and high fidelity models Protection component…