Altair RISE

A program to recognize and reward our most engaged community members

Nominate Yourself Now!

Legend isn't showing up

Hello,

i am using HyperView 2019.1. When i try to visualise the displacements in my simulation via 'Contour -> Result type: Displacement -> Apply' i can't see the corresponding legend. The same problem applies when visualising the stress or strain.

In preceding versions of HyperView this was not a problem. So i hope someone can help me 'turn on' the legend.

Thanks!

Find more posts tagged with

English

HyperView

Accepted answers

All comments

PrasannaK

Hi,

Can you share the screenshot of same?

I hope you have selected the components before clicking apply button.

Thank you

FelixB

I'm sorry for the late answer. See the screenshot attached. Yes, i did select components.

<?xml version="1.0" encoding="UTF-8"?>

Koushik Chandrashekhar_21806

Hi Felix,

Click on the Display Control icon as shown below:

Then, click on Legend(s) as shown below:

This will turn on/off the legend.

FelixB

Hi Koushik,

sadly that didn't work, as you can see from the picture attached.

Screenshot_Legend.PNG.1296b4fc7f17daa13b6e886a0e212fb0.PNG

manish maheshwari_20409

I have same issue with all our machines in company that does not have dedicated graphic cards. Seems Generic graphic cards are not supported somehow anymore.

Interestingly If you take screenshot using screenshot buttons -> it will actually show legend with colors and numbers. It just does not display on the screen when interacting with model.

Gavin Song

I have same issue with all our machines in company that does not have dedicated graphic cards. Seems Generic graphic cards are not supported somehow anymore.

Interestingly If you take screenshot using screenshot buttons -> it will actually show legend with colors and numbers. It just does not display on the screen when interacting with model.

Altair has this problem for many customers. Thye must solve it.

Jason_Craanen

Altair has this problem for many customers. Thye must solve it.

Gavin,

Please make sure your machine has a dedicated graphics card (not the integrated) and Hyperview is using it.

As mentioned in documentation

In order to ensure best performance, these options should be set to use discrete NVIDIA or AMD GPU and not the Intel GPU.

https://help.altair.com/hwdesktop/altair_help/topics/getting_started/hw_recommendation_certifications_intro_r.htm#reference_b5n_53c_d1b

Thanks

jason

Gavin Song

Gavin,

Please make sure your machine has a dedicated graphics card (not the integrated) and Hyperview is using it.

As mentioned in documentation

In order to ensure best performance, these options should be set to use discrete NVIDIA or AMD GPU and not the Intel GPU.

https://help.altair.com/hwdesktop/altair_help/topics/getting_started/hw_recommendation_certifications_intro_r.htm#reference_b5n_53c_d1b

Thanks

jason

May you put screen shot here how to select NVIDIA and AMD GPU?

Jason_Craanen

May you put screen shot here how to select NVIDIA and AMD GPU?

Gavin,

This is done through the GPU control (not hyperview).

Please refer to this article as well which mentions all this

https://community.altair.com/community?sys_id=85f88aea1b9fb410507ca6442a4bcb88&view=sp&id=community_blog&table=sn_communities_blog

Gavin Song

Gavin,

This is done through the GPU control (not hyperview).

Please refer to this article as well which mentions all this

https://community.altair.com/community?sys_id=85f88aea1b9fb410507ca6442a4bcb88&view=sp&id=community_blog&table=sn_communities_blog

I have done exactly as you to add high-performance NVIDIA processor to three Altair applications.

However, it didn't solve the legend issue.

Jason_Craanen

I have done exactly as you to add high-performance NVIDIA processor to three Altair applications.

However, it didn't solve the legend issue.

Can you verify HV is indeed using the GPU?

Do you see any messages about unsupported graphics?

Gavin Song

Jason_Craanen

Gavin,

Yes this shows that your machine is using the integrated/generic card for Hyperview, NOT the dedicated/direct gpu.

I would work with your IT dept as this has to do with your companies machines settings and not Hyperview itself.