SimSolid 2022 Release Highlights

Evan Brennan_20557

SimSolid 2022 New Features

Seam weld fatigue analysis

Seam weld fatigue analysis is now supported for stress-life methods. It is supported for both sequential and time-history based solutions.

The analysis is based on the Volvo method, which uses linearized stresses through the thickness at the weld toes to calculate the fatigue damage. This method typically requires a bending SN curve and a membrane SN curve; input of both the SN curves for seam weld fatigue is supported.

Three stress combination methods including critical plane, normal stress, and absolute max principle are available.

Frequency multi-loadcase

With frequency multi-loadcases, you can run multiple frequency response analyses with a common linked modal analysis. This feature enables automation for both pre and post-processing of frequency response load cases. It allows export of results for all frequency response dynamics into a single file for easier post-processing of the results.

Pressure, force and remote load boundary conditions are currently supported.

Save dynamic results to PUNCH file

PUNCH file export is now supported for frequency response analysis. You can now export displacement, velocity and acceleration components and magnitude to a PUNCH file. This is supported for frequency dynamics and frequency multi-loadcases.

Local language support

Chinese and Japanese local languages are now supported. The user interface and help documentation can both be accessed in local languages. To switch to a preferred language, on the menu bar, select Settings > Appearance.

Import loads on local spots

Import of forces, moments and displacements from a CSV file is now supported at user-defined spots. This is supported for structural load cases.

The spot is defined by its center, which can be input using the X, Y, and Z columns, and a diameter. Spots are automatically mapped to the closest face based on spatial locations and diameter.

CAD part instances

SimSolid now recognizes part instances from the CAD file and retains their status in the project. All part instances have the same geometry representation, geometry adaptation, and response mesh associated with them. This helps significantly reduce solution time and project file size. To review part instances, from the Assembly workbench, select the Review parts function.

See attached PDF for full description of all enhancements and bug fixes.

To download the lasted version of SimSolid, head to the Altair One Marketplace.

SimSolid_2022_ReleaseNotes.pdf

u_thumbnail