Altair RISE

It looks like your Boundary conditions are incorrect. So, your displacement value is absolutely incorrect. Kindly follow the instructions given in the exercise carefully. We cannot tell you the answers since it is an examination. Many other students are able to solve it and got the certificate.

prajwin.a23

Hi Koushik,

I have followed each and every step very carefully ,but still not able to get the results properly.

Can you tell me why they have constrained only X direction traslation and not others in the image shown?

Full Pdf in : https://www.altair.com/training/hmquickstart_2019/ch4/Ex_4a.pdf

<?xml version="1.0" encoding="UTF-8"?>

Koushik Chandrashekhar_21806

Hi Prajwin,

Nothing is wrong in the PDF. The problem is that you are unfortunately not able to follow the steps correctly while many students are able to.

I had already told you to follow the instructions carefully so that you will get the right results.

Kindly make sure you select the nodes manually at the end of the ribs for the 3^rd boundary condition carefully. This is required as it wont be selected initially by cursor dragging.

prajwin.a23

Hi Koushik,

I have not made any mistakes in third boundary condition , I tried it again now which gave me the same results .

I request you to check the following files. I am sure that I have not made any mistakes after 1 month of attempts so I request you to please verify the load collectors of my file by yourself.

<?xml version="1.0" encoding="UTF-8"?>

Unable to find an attachment - read this blog

Koushik Chandrashekhar_21806

Hi Prajwin, kindly share the .fem file

prajwin.a23

Hi Koushik,

I apologize for asking too many things . I have found the culprit which is the model file.

Instead of using the file from the examination section , I used the file from learning section which is not proper.

I have got the answer.

Amith Anoop Kumar

Hi Koushik,

I apologize for asking too many things . I have found the culprit which is the model file.

Instead of using the file from the examination section , I used the file from learning section which is not proper.

I have got the answer.

Hey @prajwin.a23 if you dont mind can you share the final result file