Selecting Loadcases or Load Steps in HM

Burner2k

I have created about 10 different load steps (Sub cases) and initially I do not want all load steps to be analyzed. How & where do I select in HM which loadsteps should be included for the analysis? I am using MSC Nastran as the solver.

tinh

Hi

Invoke menu View>Entity State Browser

You can control which loadstep will be run by check on 'export' column

Burner2k

Thanks Tinh for the reply. Does the above step also work if my solver of choice is Optistruct? i.e. I won't be necessarily exporting any kind of input deck for Optistruct (perhaps done automatically by HM) unlike Nastran etc. 

 

Still not a straightforward process...

Burner2k

This is not related to my original post...don't want to start another separate thread for just this.

 

Would be it possible to obtain an offline copy of this webinar? 

https://www.altair.com/RelatedCaseStudy.aspx?id=7391

 

Or some tutorials on Model Representation work flows in HM. 

tinh

Altair Forum User said:

Thanks Tinh for the reply. Does the above step also work if my solver of choice is Optistruct? i.e. I won't be necessarily exporting any kind of input deck for Optistruct (perhaps done automatically by HM) unlike Nastran etc. 

 

Still not a straightforward process...

 

You can try it, don't need to make this question

Altair Forum User

Altair Forum User said:

This is not related to my original post...don't want to start another separate thread for just this.

 

Would be it possible to obtain an offline copy of this webinar? 

https://www.altair.com/RelatedCaseStudy.aspx?id=7391

 

Or some tutorials on Model Representation work flows in HM. 

Hi @Burner2k

 

Unfortunately, we cannot share the offline copy of a recorded webinar. 

Burner2k

Prakash,

Are there any tutorials or documents on creating & saving different model configurations in HM,  like shown in the first part of the demo?

Altair Forum User

Hi @Burner2k  I will check and revert to you soon,