Sliding surface is not a revolution surface

Ciro Alosa_22608

Hi,

 

I have designed a 3D stepper motor with Flux. If I try to simulate it, Flux gives me the following error:

 

'The sliding surface of the mechanical set ROTOR
is not a revolution surface
Concerned face(s) : 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 81 83 85 87 89 91 93 95 97 99 101 103 105 107 109 111 113 115 117 119 121 123 125 127 129 131 133 135 137 139 141 143 145 1
Impossible to solve problem'

 

asoualmi

Hi,

Can you send us your Flux project.

 

Thanks.

Ciro Alosa_22608

How can I send you the project? 

asoualmi

You delete the mesh and use zip format.

best regards.

Ciro Alosa_22608

Thanks, I solved the problem.

asoualmi

You are welcome.

Saml

Hi Ciro,

I am very interesting in your model. In fact I am statrting to investigate how simulate a stepper motor in Flux but I am not so skilled in Flux. It is possibel to have your model? Also a dummy or not deatailed model could be very usefull!!

Thank you very much

Mihai

Hi, Ciro,

Do you remember how you solved the problem?  as I have the same one ..

Mihai

Hi Ciro, 

Do you remember the way you solved the issue? as I have the same one.. 

Ishaqlad89

Having similar issues on dual rotors and single coreless axial flux motor. Pls give a tips on how you solved the problem