Filters Position ICAST 2019.1

uri

  

 

Hello to all

When inserting filters, should they be inserted:

Inside the housing (as above)?

Exactly with hosing walls?

Outside housing walls as below?

 

Best Regards

 

Uri Inbar 

Engineering Dep.

David Quality Castings Ltd.

Tel: 972-3-9024415 Mobile: 972-52-5261177 

Fax: 972-3-9024390

E-mail: uri.i@tirosh-casting.com

Web Site: http://www.tirosh-casting.com

 

Matthieu Pupat

Uri,

 

If you import your filter from the CAD, you can use its real shape:

• Inside the housing (diameter filter < diameter channel): not the best solution because the metal can by-pass the filter
• Exactly with hosing walls (diameter filter = diameter channel): the best solution
• Outside housing walls (diameter filter > diameter channel): the metal is slowed down as the filter is filled first and once it is saturated the metal can flow.

I hope this helps.

 

Matthieu