The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
I would like to simulate compressive strength test of pervious concrete in EDEM? Is it possible?
Hi Namithasudan,
You can simulate the fracture of cementitious materials such as cured concrete in uniaxial compresison or otherwise by using a bonded particle model. A model speciffically developed for this purpose is described by Brown et al and available as an EDEM plug-in model.
https://link.springer.com/article/10.1007/s10035-014-0494-4
https://community.altair.com/community?id=kb_article&sys_id=4bc876dd1b9620d0c4dfdbd9dc4bcbc8
Best regards,
Stefan
Join us for a community conversation on accelerating power electronics design, where you'll learn how to leverage the fast simulation capabilities of Simcenter PSIM alongside the powerful design exploration and optimization features of Simcenter HEEDS. In this webinar, we’ll show how engineers can move beyond manual…
Join us for a community conversation on Pulse Width Modulation (PWM), a fundamental technique in electric motor control, and explore how different PWM strategies can yield significantly different results. This webinar provides a comparative analysis of various PWM methods and their effects on motor efficiency, torque…
Join us for a community conversation to discover the Advanced Iterative Solver(AIS) in Simcenter Feko and its application to electrically large and computationally demanding electromagnetic models. The session will provide a general overview of how iterative solution methods can help improve efficiency of large scale…
