ANSYS Thermal Results in Hyperview

Altair Forum User
Altair Forum User
Altair Employee
edited May 2022 in Community Q&A

Hello -- trying to use Hyperview to look at thermal results from ANSYS. Have done this in the past at my company using P/Thermal (GE code) and now I am working for a different customer who requires ANSYS analysis.

 

There seems to be no how-tos on the process to view temperature results in Hyperview for .rth files. Has anyone done this before and can help with some basic steps?

Tagged:

Answers

  • jakub.ziontek
    jakub.ziontek Altair Community Member
    edited March 2015

    I also wanted to ask same question. Why its so hard in hyperview??

  • Rahul_P1
    Rahul_P1
    Altair Employee
    edited March 2015

    All,

     

    Not sure the problems you are facing, are you not seeing the required results in the result type? 

     

    Please see a sample result file with thermal results attached to this post, that I can postprocess easily in HV

    Unable to find an attachment - read this blog

  • jakub.ziontek
    jakub.ziontek Altair Community Member
    edited March 2015

    My analysis is stress analysis with temperature and pressure added, than i cant postprocessing temperatures in HV. It is body force card in ansys (BF_TEMP). In ansys it is called 'Body Temperatures'

  • jakub.ziontek
    jakub.ziontek Altair Community Member
    edited March 2015

    no reply on it?

  • Rahul_P1
    Rahul_P1
    Altair Employee
    edited April 2015

    Current HyperView does not support BFTEMP as one of thermal result of Ansys.

     

    We are investigating such issues with Ansys Post processing and these will be fixed in the upcoming patches / releases,

     

    we regret the inconvenience,

  • jakub.ziontek
    jakub.ziontek Altair Community Member
    edited May 2015

    Supporting BF_TEMP is not supported in HV 13? It would help in work. Now i have to go to ansys post processing all the time when i need to make for example plot temp vs stress....

  • jakub.ziontek
    jakub.ziontek Altair Community Member
    edited June 2015

    Do you predict when BF_TEMP will be supported in HV?

  • jakub.ziontek
    jakub.ziontek Altair Community Member
    edited July 2015

    please answer, above question

  • mjohnson
    mjohnson
    Altair Employee
    edited May 2022

    This functionality is available as of version 2021.2. Legacy interface shown at top, and current interface at bottom with nodal temperature plotted. 

    image

    image

Categories