The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
hi guys,
i want to only see von mises Stress of Beam (1 D) in HyperView.
but i donot know, how to do that in hyperview or hyperworks?
Thanks for your help.
Hi 9527kun
HyperView currently don't support stress for 1D elements. Stress/Strain are available for solid and shell elements till the current version.
This may available in future versions of HyperWorks.
Hey,
I am going to update here because I ran into the same problem and hit a solution after a lot of trial and error.
The things that solved it for me was to use the PBARL property card instead of the PBAR property card. I am hoping there is an analogous card called PBEAML as well.
After this make sure that you are using the 'Standard section Library' = Optistruct, this should give you the Von Mises for 1D elements.
<If posting a screenshot on this forum were easy I would post one>
Make sure yo have the Stress = Yes output request switched on of the load step.
Hi All,
In OptiStruct v13.0, CBAR/CBEAM(PBARL/PBEAML) Stresses at evaluation points are output separately (different from PBAR/PBEAM-element) in H3D file. When you load h3d result file in HyperView, you can see a new result type like 'CBAR/CBEAM Stresses (BAR)', 'BAR' in the parentheses is the type name of beam cross section. That means each cross-section type has its own result group. And you can review all the evaluation stresses (normal, shear, and von Mises) for each cross-section type, at each element end (A or B ). For instance, Normal S3N(/emoticons/default_cool.png' alt='B)'> : means normal stress at the 3-th evaluation point of the beam element end B; Shear S6S(A) : means shear stress at the 6-th evaluation point of the beam element end A; von Mises S5V(/emoticons/default_cool.png' alt='B)'> : means von Mises stress at the 5-th evaluation point of the beam element end B. And you can see maximum normal/shear/vonMises stress at the end.
Join us for a community conversation on how High-Performance Computing (HPC) and Simcenter PSIM work together to meet the increasing demands of modern power electronics simulation. During this one-hour technical session, you'll discover how leveraging HPC can speed up simulations, improve scalability, and empower engineers…
Join us for a community conversation on accelerating your motor simulation workflow with Simcenter Simlab. In this beginner-friendly session, we'll introduce the platform's automated model-building capabilities and show how easy it is to set up your first electric motor analysis. You'll see the basic steps of geometry…
Join us for a Community Conversation where we'll discuss practical approaches to analyzing complex electromagnetic models using hybrid solver techniques. This session will provide a general overview of how different computational methods can be combined within a single simulation to address models containing varied…
