Command panel (Geom, 1D, 2D, 3D, Analysis, Tool, Post) missing from Hypermesh main window

Altair Forum User
Altair Forum User
Altair Employee
edited October 2020 in Community Q&A

Command panel (Geom, 1D, 2D, 3D, Analysis, Tool, Post) missing from Hypermesh main window. In few instances earlier, I could revive the commands by deleting 'command.cmf' and '.tcl' files, still on closing and opening HM, it would shift to the right side and subsequently disappear. Currently unable to revive. Is there any other solution  to this issue? Attached are 2 screenshots 1st with panel for reference and second without panel.

 

<?xml version="1.0" encoding="UTF-8"?>post-32425-0-17125500-1405592246_thumb.p

 

With command panel(how it should be)

 

<?xml version="1.0" encoding="UTF-8"?>post-32425-0-33589700-1405592147_thumb.p

 

Command panel disappears(currently when HM is opened)

 

Tagged:

Answers

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited July 2014

    No info about your version of Hyperwork, your HW updates, your OS, .... nobody can help you.

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited July 2014
    Altair Forum User said:

    No info about your version of Hyperwork, your HW updates, your OS, .... nobody can help you.

     

     

    Hypermesh version - 10.1

    OS - Win 7

    System - 64 bit

     

    Could you please elaborate about where can I find information about updates.

    I did click on Hypermesh  'help' tab for the same but it mentions 'No updates'. Please see attached screenshot.

     

    Please let me know what other information you need.

     

    Thank you

    <?xml version="1.0" encoding="UTF-8"?>post-32425-0-25384300-1406542878_thumb.p

  • evsm1982
    evsm1982 Altair Community Member
    edited August 2014

    Hi,

    I can't see your attached pictures, have you tried with M button. This also can be found View->Panels m.

     

    Elvis MARIA

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited August 2014
    Altair Forum User said:

    Hypermesh version - 10.1

    OS - Win 7

    System - 64 bit

     

    Could you please elaborate about where can I find information about updates.

    I did click on Hypermesh  'help' tab for the same but it mentions 'No updates'. Please see attached screenshot.

     

    Please let me know what other information you need.

     

    Thank you

    attachicon.gifUpdates.png

    Hyperworks 10.x is no longer supported. Why not try version 12.x ?

    Release 12.x works very well on my Win7 laptop.

  • Rahul_P1
    Rahul_P1
    Altair Employee
    edited August 2014

    Moumita,

     

    I also agree with the above and also your pictures are not visible, 

     

    If you work for a company that allows using 10.1 only, please contact local technical support as well, 

     

    http://www.altairhyperworks.com/ClientCenterHWSupportProduct.aspx 

     

    You can try a reinstall and also perhaps change the working directory (the place where you find the .tcl and .cmf etc) by right click on HM icon > change the path in 'start in' > apply. 

     

    Perhaps you also need to update your graphics card driver, make sure you are not using one of the unsupported cards such as Intel. 

Categories