Problem with *.t16 Marc results

Altair Forum User
Altair Forum User
Altair Employee
edited October 2020 in Community Q&A

Hello Everyone,

I have a very strange issue. I use HV for postprocessing results, and I use the MSC Marc 2014 for solving the model. Reading results from MSC Marc (t16 file) in the HV usually goes smooth (sometimes not all elements are visible ). Today I have prepared a co-simulation between Adams (Multibody model) and Marc (flexible nonlinear part). As a result from that simulation I get one results file for MSC Adams model, and one for MSC Marc model (*.t16). Using Marc Mentat I am able to post-process that t16 file, but while I am trying to import it to the HV, I get a message: 'Failed to attach results' and I can only see the model, but without results. This occur only with t16 results file from co-simulation.

Do you have any idea about this issue?

 

Kind Regards,

Paweł

 

AGH University of Science and Technology, Kraków, Poland

Tagged:

Answers

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited April 2017

    Hi Pawel,

    Ensure that the result file is complete that is the run is not stopped in the middle. Which HyperWorks version are you using?.

    If possible, please share the file so that we can also check the same from our end.

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited November 2020

    I have tried the HW 12 and 2017. I believe that the analysis is complete, because it produce Exit number 3004, this is a successful completion to a Marc simulation. Attached are marc files. Thank you for your interest.

     

    Kind Regards, Paweł

    Unable to find an attachment - read this blog

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited April 2017

    Hi Pawel,

    We are working on your query and will update you very soon.

     

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited April 2017

    Hi Pawel,

    The issue seems like the co-simulation (ADAMS and Marc) results are not currently supported. We will take up this issue to the respective team for enhancement. 

     

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited April 2017

    Hi George,

    Thank you for your effort.

    Paweł

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited October 2017

    Hi George,

     

    may I know whether this issue had been resolved or not?

    Im using HyperView 13 and encounter the same problem as Pawel.

     

    The problem is simply HyperView cannot read the .t16 results file from Marc, which been produced from Adams Marc Cosim.

     

    Seek for your further assistance.

     

    Regards

    Syakiq

  • Rahul Rajan_21763
    Rahul Rajan_21763 New Altair Community Member
    edited October 2017

    I don't see any update for above request in HyperWorks 2017.1 and 2017.2.I will update you once i get any information.

Categories