The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
How to define point anywhere in the imported CAD ?
Imported CAD body seems to have random mesh. And its only able to choose / define points in those particular nodes. How to refine that mesh Or is it has anything to do with CAD exporting / settings ?
Note: i use MV 12
Please find the image below.
https://drive.google.com/file/d/0B2rIYPnVjYNEMlk2cGVIOFI0Wlk/view?usp=sharing
Ahilan
Hi,
Import the CAD model in HyperMesh, mesh and save the model as .hm file.
Now you can able to import the .hm file in MotionView through Import>> HyperMesh.
I will only do rigid body analysis.
In that case, only the surface 2D mesh for a 3D solid body is enough ?
if you are just considering for Contact then solid elements should preferred... but for current Contact methods you may need locally fine shell mesh in Contact area..
When i create only nodes (no mesh) in HM, and i import to MV. But the nodal points didn't get transferred. what approach to follow ?
Dear ahilan,
you can add the nodes using Motion view Utility menu,while importing the step file to motionview it goes to Motion view Utility menu there you can use Hypermesh tools from the panel.
Thanks
Ram
Join us for a Community Conversation where we'll discuss practical approaches to analyzing complex electromagnetic models using hybrid solver techniques. This session will provide a general overview of how different computational methods can be combined within a single simulation to address models containing varied…
Join us for a community conversation to explore how different modeling approaches in Simcenter PSIM can help engineers simulate power electronics systems while balancing accuracy, simulation speed, and design insight. What you'll learn: Power transistor modeling : Thermal and high fidelity models Protection component…