hexa mesh on complicated feature

Altair Forum User

hai all...

 

i had a tough time meshing a part(shown in pic), i intended to do with hex8 element but at the junction where i've spoted in the pic were failing internally. 

 

2 mutually perpendicular cylinders are connected with varying fillet, the region where i couldn't mesh.. 

 

what is the approach to achieve this.. thanks in advance /emoticons/default_smile.png' alt=':)' srcset='<fileStore.core_Emoticons>/emoticons/smile@2x.png 2x' width='20' height='20'>

<?xml version="1.0" encoding="UTF-8"?>

<?xml version="1.0" encoding="UTF-8"?>

Altair Forum User

Firstly, you have to understand that we can not make full hex8 mesh for any geometry /emoticons/default_smile.png' alt=':)' srcset='/emoticons/smile@2x.png 2x' width='20' height='20'>

Altair Forum User

your reply made my day sir; thanks for that

but i'm still working on it and have seen little improvement as in the pic but again struck at that point

<?xml version="1.0" encoding="UTF-8"?>

<?xml version="1.0" encoding="UTF-8"?>

Altair Forum User

The thing is, Start from the junction and then proceed towards the outside

Altair Forum User

also try to suppress unnessery edges.. create your own edges or existing edges for smooth flow of hex mesh..

Altair Forum User

itzz done !! phew !!!!!!  /emoticons/default_cool.png' alt='B)'>

<?xml version="1.0" encoding="UTF-8"?>

yukesh.aero

Hello kanney ,

Super work and This type of model to make hexa mesh only make how much hour take and any idea to make this one like mapping tools or other in Hm