Hypermesh Global Output Cards

User: "Altair Forum User"
Altair Employee
Updated by Altair Forum User

Hi i'm studying the structural analysys of the aerodynamic pack on one formula sae car.

 

I'm interested in the max displacement caused by the pressures. I'd like to know if there is an explanation of the global output request (every single parameter), because i can't find it on the 'help page'.

 

Thank you very much

Find more posts tagged with

Sort by:
1 - 5 of 51
    User: "tinh"
    Altair Community Member
    Updated by tinh

    Hi, try enter Help > Hyperworks help home

    expand 'reference' and click on 'optistruct', looking for I/O options on browser tree

    User: "Altair Forum User"
    Altair Employee
    OP
    Updated by Altair Forum User

    Thank you

     

    After i ticked some parameters (such as damage, acceleration or energy) i can't find them on optistruct. I only find, as always, displacement and element stressed. I selected on format: 'opti'. 

    User: "tinh"
    Altair Community Member
    Updated by tinh

    I am sorry. but i do not understand your mean?

    could you explain detail your problem?

    User: "Rahul Rajan_21763"
    New Altair Community Member
    Updated by Rahul Rajan_21763

    Hi,

    I hope to get displacement & stress results you would have set up deck for linear static analysis.

    To get Damage you should perform fatigue analysis.

    To get acceleration you should perform Dynamic analysis.

    & to get energy carryout nonlinear or Impact analysis.

     

    Basically for different types of analysis you would get different different result.Hence based on analysis type solver would give default or you have to request output type. 

     

    Regards

    Rahul R

    User: "Rahul_P1"
    Altair Employee
    Updated by Rahul_P1

    Choose format as H3D if you want the results written out to H3D, opti will write it out to OP2