The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
When a solid needs to be tetrameshed, when is it recommended to use tria for 2D Type or QUAD for 2D Type?
Is it advisable to use TRIA or QUAD for the 2D Type ?
Hello
I do not much understand your doubt
when you have to mesh a solid with tetra, do not care about tria or quad because finally closure has to be trias
advice for 2d mesh is: do not use tria if possible, it is very ugly /emoticons/default_biggrin.png' alt=':D' srcset='/emoticons/biggrin@2x.png 2x' width='20' height='20'>
When you fill a closed QUAD mesh (like fixed mesh) with TET, Hypermesh with create a layer of PYRAMID before fill up the rest of your volume by TET elements. Use this method only if you need to connect your TET mesh to HEX mesh.
Join us for a Community Conversation where we'll discuss practical approaches to analyzing complex electromagnetic models using hybrid solver techniques. This session will provide a general overview of how different computational methods can be combined within a single simulation to address models containing varied…
Join us for a community conversation to explore how different modeling approaches in Simcenter PSIM can help engineers simulate power electronics systems while balancing accuracy, simulation speed, and design insight. What you'll learn: Power transistor modeling : Thermal and high fidelity models Protection component…