Adhesive connection in Abaqus
Altair EmployeeI am trying to create adhesive connections of two plates for abaqus profile in HM.
1) This adhesives created in ansa. as shown in 2nd image there is RBE3-Hexa-RB3 elements.
2) Below adhesives created in HM. but there is none like RBE3-Hexa-RB3 elements.
I want to create adhesive like same in ansa. but in HM there is RB2 at one side & RB3 at another side. please help me out.
Thanks in advance.
Best regards,
Sandeep
Answers
-
Hi Sandeep,
Can you check the Abaqus Connector Types in Help Menu where all the connectors available are listed in this. Which connector type did you use?.
<?xml version="1.0" encoding="UTF-8"?>
0 -
Hello George,
Thanks for your quick help.
I am using area connectors to define aadhesive. pls see below image FYR.
0 -
Hi Sandeep,
It should work fine normally. Can you recreate and see the same.
Please find attached video file.
0 -
Hello George,
i appreciate your efforts the way you are helping me. Thank you so much.
I tried the same as you told in video. but still not getting properly.
Note: i am using HM-13, you done in HM-14. it will affect the method???
Sandeep
0 -
Hi Sandeep,
If its possible please try with HW 14.0. I don't think there is any error or bug associated with this in HW 13.0 but I recommend you to try with the latest version.
I'll check regarding the same and will update you.
0 -
Altair Forum User said:
Hi Sandeep,
If its possible please try with HW 14.0. I don't think there is any error or bug associated with this in HW 13.0 but I recommend you to try with the latest version.
I'll check regarding the same and will update you.
Hello George,
its working fine in HW-14. but still i want to do the same in HW-13
0
