Altair RISE

A program to recognize and reward our most engaged community members

Nominate Yourself Now!

Lattice type is not set properly

hello everyone.I am trying to do lattice optimization of a component in order to reduce its weight with the parameters selected - as in picture below:( Also had tried with lot of different target lengths and min/max dia for the lattice).

image.png.bf55b3e3acbed83460f856f3b45ce4a8.png

but most of the time I get a warning message image.png.4f511c1a696a81a6958057b0732fe4ec.png - (design violation) from analysis run. Upon checking the inspirerunhistory > optimization > (the relevent file) > progress (text document)

i found text written that Realizing model #--------Lattice type is not set properly-- as in picture below:

<?xml version="1.0" encoding="UTF-8"?>

can someone please help me understand the issue and it's possible solution.

Regards

Find more posts tagged with

English

Inspire

Accepted answers

All comments

Altair Forum User

Hi Lala,

Have you tried to turn type of the optimization to 'max. stiffness'?

It seems to me, your min. safety factor isn't achievable with your BCs and loads.

Regards,

Felix

Altair Forum User

Thanks Felix Radisch for the response.

I have not tried optimization to 'max. stiffness' , in fact my goal is to minimise the mass of component by integrating lattice in it so i am choosing objective as minimize mass.

And as for the min. safety factor I set it to 1.2 and by changing lattice length and min/max dia I am getting min. safety factor from 1 to 1.4 (shown in picture below). Also I would like to highlight the fact that the min safety factor is occuring on edge of hole that can be improved by fillet or removing lattice from it and all other critical areas have high safety factor.(Also shown in picture).

What do you suggest now??.

image.png.5977aab32ec96c5b137a7229104884c3.png image.png.91bdf9b617b25556d25a244aa937b273.png image.png.e69fd9604dc63f065968b3ee02e6efd5.png

<?xml version="1.0" encoding="UTF-8"?>

Altair Forum User

Felix Radisch I have sent you some more information regarding the issue. check your inbox.

Regards. Have a good day.

Altair Forum User

HELLO ADMIN. I AM WAITING FOR RESPONSE FROM 8 TO 10 DAYS.

CAN YOU PLEASE REPLY TO THE ISSUE ADDRESSED HEAR AND ON YOUR PRIVATE MESSAGE.

Altair Forum User

Dear Lala,

Please be aware this is a user support forum where noone has to answer your questions. Additionally, please immediately stick to the common rules of communication.

Kind Regards,

Felix Radisch

Quick Links

All Categories
Recent Discussions
Activity
Unanswered
日本語 (Japanese)
한국어(Korean)
Groups