Errors in Acusolve prep while running an already successfully ran model with 2017.2 Hyperworks in 2018 Acusolve

Naren209
Naren209 Altair Community Member
edited October 2020 in Community Q&A

I successfully ran a Acusolve model with 2017.2 hyperworks with 2017 Acusolve but when ran the same model with 2017.3 Hyperworks with 2018 Acusolve i am getting a lot of errors in Acuprep. errors such as 'parameter optimization not found, there is no active parameter, parameter gravitational acceleration not found, invalid data, so on so forth. i have checked the cards for solver and i see that in problem_description card the optimization is off and radiation equation is set to none but still i am getting errors associated with it.

 

I have attached log files associated with both successful and unsuccessful runs. 

Unable to find an attachment - read this blog

Tagged:

Answers

  • acupro
    acupro
    Altair Employee
    edited December 2018

    It looks like there's an update to AcuSolve - 2018.0.1 available through the Connect system.  See if the files generated from 2017.3 HyperWorks work with AcuSolve 2018.0.1.

Categories