A place to ask questions about Altair products or solutions and receive help from community members or Altair employees
I am using flux3D for calculate Laplace force in a current path during a short circuit event. The simulation is transient. I have calculated the Laplace force in the different volumes of the current path. I am interesting to calculate the torque generated in one of the volumes by the Laplace forces of this volume. Isit…
Greetings community, I am learning to use RapidMiner to extract and to analyse occurrences of selected keywords in annual reports, prepared by commercial entities. RapidMiner works well for all the key words I study, except for one. For some reason, Filter Stopwords (English) operator filters out word 'important' for the…
In my model, steel shots and a titanium plate are introduced in a chamber. Steel shots are made of 100Cr6 and the titanium plate oscillates with 20kHz of frequency. In reality, the interaction between shots and plate does not have a constant restitution coefficient, since the restitution coefficient is dependent on the…
the non linear dynamic simulation consider the behavior of the materiale above the yield point? Because with a non linear static simulation i see that the material platicize, but the the dynamic one also if i reach the yield point the material still behave like a linear elastic and not a perfect plastic for example there…
If I have 2 files having same number of loadcases, Is there any method to plot the loadcases of 2 files side by side automatically or through script in HyperView?
Hi colleges, I'm working with a movement of a part, using the next Expression: `STEP5(TIME,0,0,0.1,80)+STEP5(TIME,0.2,80,0.3,0)` And the part, at the start has a initial displacement of 80mm: I don't understand where comes this initial displacement, any mistake in the Expression? I attached the complet file. Thanks!
Dear team, apologies for my ignorance. I am new to Hyperworks environment. I have an analysis result of a model containing several parts for about 150 load cases. Now I want to report max and min stress of each part for all the 150 load cases. Can you please suggest what is the easiest and quickest way to accomplish it?…
I recently got a student license for PSIM and activated the license but due to change my PC, now I'm trying to activate the license again, on another college PC, but i get an error warning saying "This license was alredy activated using different HostIDs". Is there something that can be done for me to activate my license?…
Hello I have found the Python script file for my simulation in flux 2D, but i want to know if it is possible to execute the code script by script to generate the model in flux?.. For example, someone without the design can easily use the python script to generate the model and all the test that was carried out. is that…
Hi, When I optimized my part for maximum stiffness at 30%, it disconnected at one of the supports. When I try out the sizing scale after optimizing, it doesn't help. I have been trying many different manipulations from what I found on the web but nothing works. I have the design space (first picture) and the optimization…
There's a wealth of content waiting for you to explore! Need support or have a question? Login or join our community.