Reviewing multiloads on nodes.

As you can see in the picture, two forces are acting on single node, on review, I am able to view the magnitude of that force. How to find about the other force? and to which load collector it belongs to, and it magnitude and other info.?

Thanks.

<?xml version="1.0" encoding="UTF-8"?>

Find more posts tagged with

English

HyperMesh

Accepted answers

All comments

Altair Forum User

There are a couple of things you can try. Turn off all load collectors, and then turn them back on one by one so only one collector is visible at any given time. If the loads are in different collectors they will only appear when their collector is displayed. The other option is to use masking. Hit F5 to activate the mask panel, switch the selection to 'Loads', and select one of the loads. Click on mask and it will disappear from the view. You can then use the 'reverse' option to switch which one is displayed.

FYI: I didn't see a picture in your original post.

Altair Forum User

There are a couple of things you can try. Turn off all load collectors, and then turn them back on one by one so only one collector is visible at any given time. If the loads are in different collectors they will only appear when their collector is displayed. The other option is to use masking. Hit F5 to activate the mask panel, switch the selection to 'Loads', and select one of the loads. Click on mask and it will disappear from the view. You can then use the 'reverse' option to switch which one is displayed.

FYI: I didn't see a picture in your original post.

Sorry for that . As you can see, the numbers are overlapping. When I click on one node to review, I can see it value but, how to find out the other load?

Thanks.

Rahul_P1

Mask will help, just mask the loads using F5

Altair Forum User

first differentiate the load collectors with different colours and then mask one by one to see the loads. By colours you can see the load collectors.